 Friends links |
|
| Picture |
Heading |
Updated |
 |
Phoscopper Brazing Alloy
Copper phoscopper brazing alloy are principle elements of the product, it owns good fluidity and is applied in the resistance brazing, flame brazing and high frequency brazing. It is used in brazing of copper and copper alloys, but not in brazing of ferro |
2017-10-22 |
 |
Nickel Bronze Brazing Alloy
Nickel bronze brazing alloy is mainly used for brazing of copper, bronze and steel, etc. Must be strictly clearing grease, oxide and other dirt on the surface of the metal, before brazing. The fluxesare recommended to be used. The strength of joint is hig |
2017-10-14 |
 |
Silver Power
The silver brazing alloy can be made intopowder, It is suitable for the brazing of narrow gap and complex components. It can save the dosage。 |
2017-10-05 |
 |
Pure Copper Solder
Pure Copper brazer is applied to the brazing of stainless steel,hard alloys such as tungsten, molybdenum, iron, kovar, nickel etc, applied widely in the industries of machinery, electromechanical, refrigeration, automobile and bicycle etc. |
2017-09-21 |
 |
Brass Solder
Brass brazing alloy is applied to flame brazing, high frequency brazing, resistance brazing, and is used for brazing of copper, copper alloys, steel, cast iron and hard alloys. The dirt such as grease, oxide on the surface of brazing metals should be well |
2017-09-13 |
 |
Tin-bearing Silver Brazing Alloy
Tin-bearing silver brazing alloy owns good properties such as low melting point, excellent wettability and ability to fill the clearances, high mechanical strength, good plasticity, electrical conductivity and corrosion resistance. It is used for brazing |
2017-09-11 |
 |
Flux-cored Aluminium Brazing Alloy
The Aluminium brazing alloy can be made into flux cored brazing alloy. Flux cored Aluminium brazing alloy is applicable to automatic brazing. It need not coating flux, can has higher production efficiency, saves the material consumption. |
2017-08-30 |
 |
Sn-Ag Solder
Tin-lead solder owns many advantages including low melting point,excellent wettability and low cost ,so it was widely applied in the industry of electronic packaging ,for instance,the joint of electronic component leads and PCB pad.However as a toxic meta |
2017-08-22 |
|
